Jasper
Router Base Plate with Centering Pin
Item #144931
Model M575
Regular price
$
33
.
99
Sale price
$
33
.
99
Was
$33.99
Unit price
per
Jasper
Router Base Plate with Centering Pin
Item #144931
Model M575
Regular price
$
33
.
99
Sale price
$
33
.
99
Was
$33.99
Unit price
per
Frustrated by a router with a base plate that uses a limited range of hard to find guide bushings? Even worse is one that offers no means to center th. . .
View More Details
Details
Frustrated by a router with a base plate that uses a limited range of hard to find guide bushings? Even worse is one that offers no means to center those guides once they are installed. This unit is not only pre-drilled for all the routers listed below, it also includes a cleverly designed centering pin that centers the guide to the router collet. Simply install a Porter-Cable style guide, use the centering pin to line-up the base plate concentric to the collet, install your bit, and rest assured your bit is following the path the template or jig intended. This set-up is an absolute must for precision operation of dovetail jigs!
Fits the following models: Sears Models 315.275 000-100-110, 315.175 070-040-050-060 RyobiMakita 3612 and 3621 Milwaukee 1615/1616/1619 series, HitachiBosch 1615 and 1617/1618 series, DeWalt DW616/618 series, DW621, and DW625, Fein FT-1800 Elu 177, Porter Cable 690 series, 7529, and 8529 Freud FT2000E. Complete with screws and installation instructions.
Fits the following models: Sears Models 315.275 000-100-110, 315.175 070-040-050-060 RyobiMakita 3612 and 3621 Milwaukee 1615/1616/1619 series, HitachiBosch 1615 and 1617/1618 series, DeWalt DW616/618 series, DW621, and DW625, Fein FT-1800 Elu 177, Porter Cable 690 series, 7529, and 8529 Freud FT2000E. Complete with screws and installation instructions.
Features:
• Pre-drilled for more than ten router models
• Includes a cleverly designed centering pin that centers the guide to the router collet
• Comes complete with screws and installation instructions
Compare With
4.50
Based on 2 reviews
Write Review
Sort
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
1
1
0
0
0
Product Reviews
I have been making some gates in the fence attached to my house. I was desirous of routing hinges (4; heavy gate) on both the gate & post next to it. I had a Porter-Cable plunge router, acquired at an auction, without the standard guide bushing adapter; this not only fit (as the description said it would), but the centering pin is definitely a huge plus: using it makes sure that you are in line with the axis of your router, so that you have an EVEN distance from your bit to the edge of your template. This means that you can have far more precise, reproducible results. For me, I routed 8 hinge beds (4 hinges * 2 beds/hinge) with NO need to "adjust"--fix with a hand chisel--ANY of them. First time doing this, excellent results, so this base and centering pin were a big part of my fantastic success.
Was this review helpful?
5 years ago
Router Base Plate with Centering Pin
Good concept but could that much better if made with Lexan. Word of caution when mounting plate on router- do not use Locktite red or blue on screws- even a very small amount will react with the plexiglass and cause it to crack as soon as you tighten the screws. Should be a warning about this. Ruined 2 plates.
2 people found this review helpful.
Was this review helpful?
7 years ago
New content loaded
