Small parts are no match for Woodpeckers Iron-Grip™ Small Parts Holder. This clever tool enhances your safety and improves accuracy when routing small workpieces on your router table.

Unlike other small parts holders on the market, Iron-Grip™ is engineered with aircraft-grade aluminum jaws and a heavy-duty Acme-threaded steel vise screw so you can be assured your workpiece is held securely in place.

When you're using a bearing-guided router bit, Iron-Grip™ moves your hands out of the way and effectively makes your workpiece "bigger" by clamping it in the same plane as the three aluminum clamp blocks. Depending on the profile of your router bit, parts as small as 3/4" x 3/4" can be gripped securely and routed safely.

The Iron-Grip™ isn’t limited to use with only bearing-guided router bits. It includes a fence guide that can handle a depth cut up to 1-1/2" and a clamping capacity up to 10-1/2". This means you can use it to safely and accurately cut rabbets, dadoes, grooves, tenons and half-lap joints on small parts. No matter how narrow your workpiece is, you can safely route it across any straight bit. Just align your stock and the fence guide to the fence. The fence guide slides along the fence and carries your narrow workpiece perfectly through the cut.

The holder includes threaded stop pins that can be set in the holes of the jaws. With the workpiece safely set beyond the jaw, you can easily make repeated routes. There are five sets of threaded holes in the jaws for the stop pins, ranging from 1/2" from the edge to 3-3/4" from the edge. When not in use, the stop pins are conveniently stored on the outside of the jaws.

Like all Woodpeckers products, the Iron Grip™ Small Parts Holder is proudly machined and carefully inspected in the Strongsville, OH facility, just south of Cleveland.