Woodcraft of Roanoke

End Grain Cutting Boards Made Simple

Saturday, April 12, 9 AM - 4 PM

If you have been woodworking for any time at all you have scrap pieces of wood in your shop. We will show you how to repurpose your scraps into a cutting board. This class is designed show that end grain cutting boards are more about the process than our current woodworking skill set. We will take you through layout/design, building, and finishing your (potentially)first end grain cutting board. WARNING (making end grain cutting boards can become additive). We supply all the materials, and you will go home with a beautiful cutting board.

Introduction To Bowl Turning

Sunday, April 13, 1 PM - 5 PM

Learn the fundamentals of bowl turning. This will include bowl design, blank preparation, chucking, shaping of outside, hollowing of inside and finishing. You will also learn the proper use of bowl turning tools and how to easily sharpen them. You will be proud to take home and display or use the bowl you make in class.

Epoxy Poured Charcuterie Board

Part 1: Wednesday, April 16, 4 PM - 7 PM

Part 2: Wednesday, April 23, 4 PM - 7 PM

Make an eye-popping charcuterie board with an epoxy poured center. Building molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition. No refunds for Cancellations/Reschedules within 7 days of class date.

Router Essentials - Full Day Workshop

Saturday, April 19, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

Antique Peppermill

Sunday, April 20, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Building a Traditional Pegged Stool

Part 1: Saturday, April 26, 9 AM - 5 PM

Part 2: Sunday, April 27, 9 AM - 5 PM

Join us for an immersive two-day woodworking workshop where we will build a classic low-height pegged stool, an early furniture form that dates back centuries. Traditional stools, commonly found in medieval households and early European homes, are characterized by their robust, mortise-and-tenon construction and simple yet elegant design. Students will gain hands-on experience using traditional hand tools such as hand planes, chisels, handsaws, and marking tools. While also incorporating modern efficiency with table saws, router tables, and tapering jigs. This class also introduces the precursor of chair-making concepts, including resultant angles, splay, and rake—fundamental skills for advancing into Windsor chairs or other post-and-rung furniture styles. At the end of the class, you’ll leave with your own handmade stool and a deeper appreciation for historical woodworking techniques!

Introduction to Lasers for Woodworking

Friday, May 2, 5 PM - 9 PM

Upgrade your woodworking skills incorporating the use of laser etching and engraving. Basic overview/understanding of XTOOLs software. Learn how to create your own woodworking LOGO. Understand some of the applications such as engrave pens, Christmas ornaments, and logos. Use the laser to layout/cut wood for classic scroll saw projects. Learn to personalize your woodworking projects. For the class we will be utilizing both the XTOOLS F1 and F1 Ultra. We will give a basic understanding of the differences between the two. There will not be a need to bring a computer however if you are able to download the XTOOLS software on a laptop prior to the class you are welcome to bring it with you. The intention of this class is to introduce you to the endless possibilities that incorporating a laser into your shop.

Introduction To Turning Pens

Saturday, May 3, 9 AM - 12:30 PM

Learn how to make the professional pens found in fine gift shops. Mark will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed pen to show off. Soon you will be designing and making these works of art for family and friends.

Introduction To Woodturning

Saturday, May 3, 1 PM - 5 PM

The safe use of a wood lathe and turning tools will be emphasized. Choice of wood, elements of design, ways of holding the wood onto the lathe, proper turning techniques and tool sharpening are discussed and demonstrated. Each student will actually turn a project to take home.

Turn a Lidded Box

Sunday, May 4, 1 PM - 5 PM

This class will go over the tools and techniques to turn a lidded box with a fit lid. With just a few tools and a small amount of almost any hardwood, burl, or exotic wood, we will make a beautiful gift, or craft show item. We will go over chucking methods and techniques to create your design, end grain hollowing, and sanding and applying sanding sealer, and friction finish or poly. Each Student will take home a box to show off to their friends and family. Some woodturning experience is preferred.

Beginning Knife Making

Part 1: Friday, May 9, 5 PM - 7 PM

Part 2: Saturday, May 10, 9:30 AM - 11:30 AM

Learn the fundamentals of knife kit construction to include shaping and installing knife handles or “scales”, custom pins, or rivets provided in the kits, sanding and finishing the handles to produce a knife you’d be proud to own or gift away. In the class you will use a drill press, bandsaw, oscillating sander, and clamps and epoxies. All materials and knife kits are included in this class of four hours over two consecutive days. Each participant will take home the knife created in this class. Please bring your own safety glasses and dust mask

Introduction To Bowl Turning

Sunday, May 11, 1 PM - 5 PM

Learn the fundamentals of bowl turning. This will include bowl design, blank preparation, chucking, shaping of outside, hollowing of inside and finishing. You will also learn the proper use of bowl turning tools and how to easily sharpen them. You will be proud to take home and display or use the bowl you make in class.

End Grain Cutting Boards Made Simple

Saturday, May 17, 9 AM - 4 PM

If you have been woodworking for any time at all you have scrap pieces of wood in your shop. We will show you how to repurpose your scraps into a cutting board. This class is designed show that end grain cutting boards are more about the process than our current woodworking skill set. We will take you through layout/design, building, and finishing your (potentially)first end grain cutting board. WARNING (making end grain cutting boards can become additive). We supply all the materials, and you will go home with a beautiful cutting board.

Antique Peppermill

Sunday, May 18, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Epoxy Poured Charcuterie Board

Part 1: Wednesday, May 21, 4 PM - 7 PM

Part 2: Wednesday, May 28, 4 PM - 7 PM

Make an eye-popping charcuterie board with an epoxy poured center. Building molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition. No refunds for Cancellations/Reschedules within 7 days of class date.

End Grain Basket Weave Cutting Board

Saturday, May 31, 9 AM - 4:30 PM

This is possibly one of the simplest 3D cutting boards to make. Tom will present tips on precise glue ups, cutting on a table saw, flattening your boards on a planer, sanding, routing, and finishing. In addition to the cutting board, you will make blanks for knife handles that will match your new board. We supply all the materials, and you will go home with a 3D cutting board.

Introduction to Lasers for Woodworking

Friday, June 6, 5 PM - 9 PM

Upgrade your woodworking skills incorporating the use of laser etching and engraving. Basic overview/understanding of XTOOLs software. Learn how to create your own woodworking LOGO. Understand some of the applications such as engrave pens, Christmas ornaments, and logos. Use the laser to layout/cut wood for classic scroll saw projects. Learn to personalize your woodworking projects. For the class we will be utilizing both the XTOOLS F1 and F1 Ultra. We will give a basic understanding of the differences between the two. There will not be a need to bring a computer however if you are able to download the XTOOLS software on a laptop prior to the class you are welcome to bring it with you. The intention of this class is to introduce you to the endless possibilities that incorporating a laser into your shop.

Introduction To Turning Pens

Saturday, June 7, 9 AM - 12:30 PM

Learn how to make the professional pens found in fine gift shops. Mark will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed pen to show off. Soon you will be designing and making these works of art for family and friends.

Introduction To Woodturning

Saturday, June 7, 1 PM - 5 PM

The safe use of a wood lathe and turning tools will be emphasized. Choice of wood, elements of design, ways of holding the wood onto the lathe, proper turning techniques and tool sharpening are discussed and demonstrated. Each student will actually turn a project to take home.

Turn a Lidded Box

Sunday, June 8, 1 PM - 5 PM

This class will go over the tools and techniques to turn a lidded box with a fit lid. With just a few tools and a small amount of almost any hardwood, burl, or exotic wood, we will make a beautiful gift, or craft show item. We will go over chucking methods and techniques to create your design, end grain hollowing, and sanding and applying sanding sealer, and friction finish or poly. Each Student will take home a box to show off to their friends and family. Some woodturning experience is preferred.

Beginning Knife Making

Part 1: Friday, June 13, 5 PM - 7 PM

Part 2: Saturday, June 14, 9:30 AM - 11:30 AM

Learn the fundamentals of knife kit construction to include shaping and installing knife handles or “scales”, custom pins, or rivets provided in the kits, sanding and finishing the handles to produce a knife you’d be proud to own or gift away. In the class you will use a drill press, bandsaw, oscillating sander, and clamps and epoxies. All materials and knife kits are included in this class of four hours over two consecutive days. Each participant will take home the knife created in this class. Please bring your own safety glasses and dust mask

Introduction To Bowl Turning

Sunday, June 15, 1 PM - 5 PM

Learn the fundamentals of bowl turning. This will include bowl design, blank preparation, chucking, shaping of outside, hollowing of inside and finishing. You will also learn the proper use of bowl turning tools and how to easily sharpen them. You will be proud to take home and display or use the bowl you make in class.

Antique Peppermill

Sunday, June 22, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Router Essentials - Full Day Workshop

Friday, June 27, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

End Grain Basket Weave Cutting Board

Saturday, June 28, 9 AM - 4:30 PM

This is possibly one of the simplest 3D cutting boards to make. Tom will present tips on precise glue ups, cutting on a table saw, flattening your boards on a planer, sanding, routing, and finishing. In addition to the cutting board, you will make blanks for knife handles that will match your new board. We supply all the materials, and you will go home with a 3D cutting board.

Epoxy Poured Charcuterie Board

Part 1: Sunday, June 29, 1 PM - 4 PM

Part 2: Sunday, July 6, 1 PM - 4 PM

Make an eye-popping charcuterie board with an epoxy poured center. Building molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition. No refunds for Cancellations/Reschedules within 7 days of class date.

Introduction To Turning Pens

Saturday, July 5, 9 AM - 12:30 PM

Learn how to make the professional pens found in fine gift shops. Mark will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed pen to show off. Soon you will be designing and making these works of art for family and friends.

Introduction To Woodturning

Saturday, July 5, 1 PM - 5 PM

The safe use of a wood lathe and turning tools will be emphasized. Choice of wood, elements of design, ways of holding the wood onto the lathe, proper turning techniques and tool sharpening are discussed and demonstrated. Each student will actually turn a project to take home.

Router Essentials - Full Day Workshop

Wednesday, July 9, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

Beginning Knife Making

Part 1: Friday, July 11, 5 PM - 7 PM

Part 2: Saturday, July 12, 9:30 PM - 11:30 AM

Learn the fundamentals of knife kit construction to include shaping and installing knife handles or “scales”, custom pins, or rivets provided in the kits, sanding and finishing the handles to produce a knife you’d be proud to own or gift away. In the class you will use a drill press, bandsaw, oscillating sander, and clamps and epoxies. All materials and knife kits are included in this class of four hours over two consecutive days. Each participant will take home the knife created in this class. Please bring your own safety glasses and dust mask

Introduction To Bowl Turning

Sunday, July 13, 1 PM - 5 PM

Learn the fundamentals of bowl turning. This will include bowl design, blank preparation, chucking, shaping of outside, hollowing of inside and finishing. You will also learn the proper use of bowl turning tools and how to easily sharpen them. You will be proud to take home and display or use the bowl you make in class.

Epoxy Poured Charcuterie Board

Part 1: Friday, July 18, 9 AM - 5 PM

Part 2: Friday, July 25, 9 AM - 5 PM

Make an eye-popping charcuterie board with an epoxy poured center. Building molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition. No refunds for Cancellations/Reschedules within 7 days of class date.

End Grain Cutting Boards Made Simple

Saturday, July 19, 9 AM - 4 PM

If you have been woodworking for any time at all you have scrap pieces of wood in your shop. We will show you how to repurpose your scraps into a cutting board. This class is designed show that end grain cutting boards are more about the process than our current woodworking skill set. We will take you through layout/design, building, and finishing your (potentially)first end grain cutting board. WARNING (making end grain cutting boards can become additive). We supply all the materials, and you will go home with a beautiful cutting board.

Turn a Lidded Box

Sunday, July 20, 1 PM - 5 PM

This class will go over the tools and techniques to turn a lidded box with a fit lid. With just a few tools and a small amount of almost any hardwood, burl, or exotic wood, we will make a beautiful gift, or craft show item. We will go over chucking methods and techniques to create your design, end grain hollowing, and sanding and applying sanding sealer, and friction finish or poly. Each Student will take home a box to show off to their friends and family. Some woodturning experience is preferred.

Building a Traditional Pegged Stool

Part 1: Wednesday, July 23, 9 AM - 5 PM

Part 2: Thursday, July 24, 9 AM - 5 PM

Join us for an immersive two-day woodworking workshop where we will build a classic low-height pegged stool, an early furniture form that dates back centuries. Traditional stools, commonly found in medieval households and early European homes, are characterized by their robust, mortise-and-tenon construction and simple yet elegant design. Students will gain hands-on experience using traditional hand tools such as hand planes, chisels, handsaws, and marking tools. While also incorporating modern efficiency with table saws, router tables, and tapering jigs. This class also introduces the precursor of chair-making concepts, including resultant angles, splay, and rake—fundamental skills for advancing into Windsor chairs or other post-and-rung furniture styles. At the end of the class, you’ll leave with your own handmade stool and a deeper appreciation for historical woodworking techniques!

Joinery Essentials

Saturday, July 26, 9 AM - 5 PM

Joinery is at the heart of fine woodworking, ensuring strong, lasting, and visually appealing furniture. This full-day, hands-on workshop introduces students to the fundamental woodworking joints, blending both traditional hand-tool techniques and modern power-tool methods. Students will learn how to cut and assemble dovetails, mortise and tenon joints, box joints, lap joints, and dadoes—all essential for furniture making. We will explore proper joint selection, marking and measuring techniques, cutting methods, and best practices for accuracy and strength. By the end of the day, students will have hands-on experience in crafting precise joinery and gain confidence in their woodworking skills

Antique Peppermill

Sunday, July 27, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Introduction to Lasers for Woodworking

Monday, July 28, 5 PM - 9 PM

Upgrade your woodworking skills incorporating the use of laser etching and engraving. Basic overview/understanding of XTOOLs software. Learn how to create your own woodworking LOGO. Understand some of the applications such as engrave pens, Christmas ornaments, and logos. Use the laser to layout/cut wood for classic scroll saw projects. Learn to personalize your woodworking projects. For the class we will be utilizing both the XTOOLS F1 and F1 Ultra. We will give a basic understanding of the differences between the two. There will not be a need to bring a computer however if you are able to download the XTOOLS software on a laptop prior to the class you are welcome to bring it with you. The intention of this class is to introduce you to the endless possibilities that incorporating a laser into your shop.

Introduction To Turning Pens

Saturday, August 2, 9 AM - 12:30 PM

Learn how to make the professional pens found in fine gift shops. Mark will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed pen to show off. Soon you will be designing and making these works of art for family and friends.

Introduction To Woodturning

Saturday, August 2, 1 PM - 5 PM

The safe use of a wood lathe and turning tools will be emphasized. Choice of wood, elements of design, ways of holding the wood onto the lathe, proper turning techniques and tool sharpening are discussed and demonstrated. Each student will actually turn a project to take home.

Router Essentials - Full Day Workshop

Sunday, August 3, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

Beginning Knife Making

Part 1: Friday, August 8, 5 PM - 7 PM

Part 2: Saturday, August 9, 9:30 AM - 11:30 AM

Learn the fundamentals of knife kit construction to include shaping and installing knife handles or “scales”, custom pins, or rivets provided in the kits, sanding and finishing the handles to produce a knife you’d be proud to own or gift away. In the class you will use a drill press, bandsaw, oscillating sander, and clamps and epoxies. All materials and knife kits are included in this class of four hours over two consecutive days. Each participant will take home the knife created in this class. Please bring your own safety glasses and dust mask

Joinery Essentials

Sunday, August 10, 9 AM - 5 PM

Joinery is at the heart of fine woodworking, ensuring strong, lasting, and visually appealing furniture. This full-day, hands-on workshop introduces students to the fundamental woodworking joints, blending both traditional hand-tool techniques and modern power-tool methods. Students will learn how to cut and assemble dovetails, mortise and tenon joints, box joints, lap joints, and dadoes—all essential for furniture making. We will explore proper joint selection, marking and measuring techniques, cutting methods, and best practices for accuracy and strength. By the end of the day, students will have hands-on experience in crafting precise joinery and gain confidence in their woodworking skills

Building a Traditional Pegged Stool

Part 1: Thursday, August 14, 9 AM - 5 PM

Part 2: Friday, August 15, 9 AM - 5 PM

Join us for an immersive two-day woodworking workshop where we will build a classic low-height pegged stool, an early furniture form that dates back centuries. Traditional stools, commonly found in medieval households and early European homes, are characterized by their robust, mortise-and-tenon construction and simple yet elegant design. Students will gain hands-on experience using traditional hand tools such as hand planes, chisels, handsaws, and marking tools. While also incorporating modern efficiency with table saws, router tables, and tapering jigs. This class also introduces the precursor of chair-making concepts, including resultant angles, splay, and rake—fundamental skills for advancing into Windsor chairs or other post-and-rung furniture styles. At the end of the class, you’ll leave with your own handmade stool and a deeper appreciation for historical woodworking techniques!

End Grain Basket Weave Cutting Board

Saturday, August 16, 9 AM - 4:30 PM

This is possibly one of the simplest 3D cutting boards to make. Tom will present tips on precise glue ups, cutting on a table saw, flattening your boards on a planer, sanding, routing, and finishing. In addition to the cutting board, you will make blanks for knife handles that will match your new board. We supply all the materials, and you will go home with a 3D cutting board.

Antique Peppermill

Sunday, August 17, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Introduction to Lasers for Woodworking

Saturday, August 23, 9 AM - 1 PM

Upgrade your woodworking skills incorporating the use of laser etching and engraving. Basic overview/understanding of XTOOLs software. Learn how to create your own woodworking LOGO. Understand some of the applications such as engrave pens, Christmas ornaments, and logos. Use the laser to layout/cut wood for classic scroll saw projects. Learn to personalize your woodworking projects. For the class we will be utilizing both the XTOOLS F1 and F1 Ultra. We will give a basic understanding of the differences between the two. There will not be a need to bring a computer however if you are able to download the XTOOLS software on a laptop prior to the class you are welcome to bring it with you. The intention of this class is to introduce you to the endless possibilities that incorporating a laser into your shop.

Epoxy Poured Charcuterie Board

Part 1: Sunday, August 24, 1 PM - 4 PM

Part 2: Sunday, August 31, 1 PM - 4 PM

Make an eye-popping charcuterie board with an epoxy poured center. Building molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition. No refunds for Cancellations/Reschedules within 7 days of class date.

Turn a Lidded Box

Saturday, August 30, 9 AM - 1 PM

This class will go over the tools and techniques to turn a lidded box with a fit lid. With just a few tools and a small amount of almost any hardwood, burl, or exotic wood, we will make a beautiful gift, or craft show item. We will go over chucking methods and techniques to create your design, end grain hollowing, and sanding and applying sanding sealer, and friction finish or poly. Each Student will take home a box to show off to their friends and family. Some woodturning experience is preferred.