Woodcraft of Spokane

Fundamentals Of Finishing

Saturday, April 19, 10 AM - 4 PM

What was originally two classes is now one. This class is an information filled journey through finishing. The morning of the class will be a lecture covering safety, the science of wood and finishes, and the differences between finishes. The afternoon will be hands-on, so be prepared to get a little messy. You’ll be learning proper sanding techniques, how to strip old finishes, applying different finishes and finally, spray techniques.

Introduction to the Wood Lathe

Sunday, April 20, 10:30 AM - 4:30 PM

This class is for the brand new woodturner and those for whom any association with the lathe may have been many years ago. It is also for those who have recently acquired a lathe or those who are anticipating purchasing one. We will introduce you to the basics of woodturning, the medium we use (wood), some of the things you can do on the lathe, which lathe might be best for you, and how to use it safely. You will be told about all of those other things you will need but nobody told you about - tools, grinders, chucks, drills, sandpaper, finishes, etc. Some of these (turning tools for instance) are a necessity, while others are desirable options. We will cover some basic sharpening techniques using a roughing gouge for our demonstration. Time permitting and how well you grasp a few basic tool techniques, you will be guided through making a simple project that you can take home and use. (All materials are included)

Turn a Vase

Sunday, April 20, 12 PM - 4 PM

Learn to turn a small vase. Learn the tips and techniques used for creating vases that can be scaled up for whatever size vase you care to make.

Basic Cabinet Making

Part 1: Saturday, April 26, 10 AM - 5 PM

Part 2: Sunday, April 27, 11 AM - 4 PM

Learn to make basic cabinets for the kitchen, bathroom or shop in this two-day class. Bob will discuss all aspects of cabinet making such as design, layout, and building the carcass. Bob will teach you how to use the pocket hole jig for joining face frames, and for joining the carcasses of the cabinets. You will make a shelf and then use a jig for drilling shelf pin holes. The router table, table saw, jointer, sander, and planer will all be used. During the class, you will make and then take home a 2' x 2' cabinet.

Shop Safety

Saturday, May 3, 10 AM - 1 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required. CLS 226

Shop Safety

Saturday, May 3, 2 PM - 5 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required. CLS 226

Bandsaw 101

Sunday, May 4, 12 PM - 4 PM

Learn how to select a blade and adjust the tension, set the guide blocks/bearings, check wheel alignment, change tires, switch blades and use the tilting table. In addition, some cutting techniques such as re-sawing and circle cutting will be covered as well. This is a hands-on class so come prepared to practice and get dusty. BSAW101NT

Introduction to the Wood Lathe

Saturday, May 10, 10 AM - 4 PM

This class is for the brand new woodturner and those for whom any association with the lathe may have been many years ago. It is also for those who have recently acquired a lathe or those who are anticipating purchasing one. We will introduce you to the basics of woodturning, the medium we use (wood), some of the things you can do on the lathe, which lathe might be best for you, and how to use it safely. You will be told about all of those other things you will need but nobody told you about - tools, grinders, chucks, drills, sandpaper, finishes, etc. Some of these (turning tools for instance) are a necessity, while others are desirable options. We will cover some basic sharpening techniques using a roughing gouge for our demonstration. Time permitting and how well you grasp a few basic tool techniques, you will be guided through making a simple project that you can take home and use. (All materials are included)

Table Saw Basics

Sunday, May 11, 12 PM - 4 PM

The table saw is the centerpiece of any woodworking shop. However, many people are not getting the best performance from this critical machine. We will cover such topics as safe operations, proper blade selection, how to check it during use, and tricks and tips to make sure it continues to perform as you want it to. Hands on work will include basic rip cuts and cross cuts.

Bandsaw Boxes Made Simple

Saturday, May 17, 10 AM - 4 PM

In this class you will tune up your skills by using the band saw, spindle sander, belt sander, disk sander, clamping and gluing. With expert guidance from Harlem, you will take a simple block of wood and turn it into a beautiful box. The skills you learn will enable you to progress into many other uses for your band saw. (CLS266)

Router 101

Sunday, May 18, 12 PM - 4 PM

Join us for the first in a series of skills building router classes sure to put you on the right track with your new router. This hands-on course will cover the basic functions of one of the workshop's most versatile tools. The router can be used for everything from putting a decorative edge on wood, to making fast and accurate mortise and tenon joints. Topics include router safety, choosing a router, making jigs, bit selection, router tables and more. Students will get practical experience using the fixed base router and router table, while completing a small project. This course provides the foundation for more advanced techniques and classes.

Making a Cedar Basket

Saturday, May 24, 11 AM - 4 PM

Randy will provide hands-on instruction for the steps to make a Cedar Gathering Basket. Completed basket measures 16" x 8". Will cover material selection, layout and machining, and finishes.

Basic Pen Turning

Sunday, May 25, 12 PM - 4 PM

Did you know that you can make the same stylish and professional looking pens as those available in fine gift shops? Learn the techniques that produce excellent results every time. David will show you how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. Soon you will be making pens for all of your friends. And now you can double your enjoyment... make one pen to give away and one for yourself. That's right...you get to make TWO pens!

Reviving & Restoring Hand Planes

Saturday, May 31, 10 AM - 4 PM

Do you have an old bench plane around that you don't use? Did you buy an old plane at a yard or estate sale that needs some TLC ? Or how about newer planes that you don't use because they don't perform up to your expectations? David will show you how to make old planes useable again and how to tune up new planes to make them perform 100% better. Some of the subjects covered will include sharpening, dealing with rust, repairing knobs and totes, flattening soles and what to look for when contemplating the purchase of a plane - old or new. ( Your plane irons must be in reasonable condition - not too much rust or pitting). Join us for a day of fun making this important hand tool a part of your arsenal again.

Shop Safety

Sunday, June 1, 10 AM - 1 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required.

Shop Safety

Sunday, June 1, 2 PM - 5 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required. CLS 226

Fundamentals of Finishing

Saturday, June 7, 10 AM - 4 PM

What was originally two classes is now one. This class is an information filled journey through finishing. The morning of the class will be a lecture covering safety, the science of wood and finishes, and the differences between finishes. The afternoon will be hands-on, so be prepared to get a little messy. You’ll be learning proper sanding techniques, how to strip old finishes, applying different finishes and finally, spray techniques.

Casting Pen Blanks with Alumilite

Sunday, June 8, 12 PM - 4 PM

In this hands-on class, we will cover the use of Alumilite to create your own basic/custom "acrylic" pen blanks. We will discuss the use of dyes and pigments, pressure casting, open casting and different types of molds. You will mix and pour one single color pen blank during class. Because of the cure time required, students should plan to return the next day to retrieve their blank and mold. (We can ship it to you for a nominal fee should you prefer.)

Ultimate Epoxy Experience

Part 1: Saturday, June 14, 9 AM - 1 PM

Part 2: Sunday, June 15, 3 PM - 7 PM

Students who register for this class will receive 8+ hours of in depth instruction from Jess Crow, one of the nation's leading epoxy artist's and innovators. Topics covered include using molds, making molds, mixing colorants and resin, conducting deep pours, de-molding projects, sanding, and applying a final epoxy finish. In addition to the extra time spent with Jess in a smaller class setting, all students will receive one of the reusable resin molds to take home and use for future projects! You will be working on two projects throughout this class. One will be a multi-layered pour you will work over the two days and one will be done the first day of class and demolded the second day.

River Style Lazy Susan

Saturday, June 14, 3 PM - 7 PM

Join Jess Crow, one of the nation's leading epoxy artistic woodworking innovators, for this brand new class where you will learn how to create a river style round. This round can be used as a clock, serving tray, lazy susan or more. Once you have the concept down you will be able to take this technique and turn it into a table of any size or shape. Jess will guide students through the river style process, including how you prepare a live edge slab*, how to save not only wood, but epoxy, creating a River Style project using Jess's "more is less" method, adding custom colors and designs, selecting and pouring the proper resin, and more! Students will have the option to add either handles or feet to their boards when they come back to pick up their projects. *Note about this class. We will not be using a live edge slab, rather Jess's signature technique to conserve epoxy while having the look of a live river. During class there will be a complete walkthrough on how to build a live edge river table and a syllabus will be made available covering both techniques.

Ocean Wave Charcuterie Board

Sunday, June 15, 9 AM - 1 PM

Make a statement for your home or as a gift! Capture the popular Ocean Wave technique that Jess helped pioneer in this fun, engaging class. During this class, you'll start with a practice board to get a feel for creating cells within epoxy then you'll advance into making your own charcuterie board. Techniques covered include mixing colors and also how not to mix colors. Beginner to Advanced.

Introduction to the Wood Lathe

Saturday, June 21, 10 AM - 4 PM

This class is for the brand new woodturner and those for whom any association with the lathe may have been many years ago. It is also for those who have recently acquired a lathe or those who are anticipating purchasing one. We will introduce you to the basics of woodturning, the medium we use (wood), some of the things you can do on the lathe, which lathe might be best for you, and how to use it safely. You will be told about all of those other things you will need but nobody told you about - tools, grinders, chucks, drills, sandpaper, finishes, etc. Some of these (turning tools for instance) are a necessity, while others are desirable options. We will cover some basic sharpening techniques using a roughing gouge for our demonstration. Time permitting and how well you grasp a few basic tool techniques, you will be guided through making a simple project that you can take home and use. (All materials are included)

Build a Floating Picture Frame

Sunday, June 22, 12 PM - 4 PM

Join Randy in going over the steps and techniques for building a Floating Picture Frame. This hands-on class will go over material selection, lay-out, and machining parts. Students will gain experience on the table saw, router table, and with other hand tools. Frames will be assembled and finished during class.

Basic Cabinet Making

Part 1: Saturday, June 28, 10 AM - 5 PM

Part 2: Sunday, June 29, 11 AM - 4 PM

Learn to make basic cabinets for the kitchen, bathroom or shop in this two-day class. Bob will discuss all aspects of cabinet making such as design, layout, and building the carcass. Bob will teach you how to use the pocket hole jig for joining face frames, and for joining the carcasses of the cabinets. You will make a shelf and then use a jig for drilling shelf pin holes. The router table, table saw, jointer, sander, and planer will all be used. During the class, you will make and then take home a 2' x 2' cabinet.

Flags of Valor

Part 1: Saturday, July 5, 9:30 AM - 5:30 PM

Part 2: Sunday, July 6, 10:30 AM - 4 PM

Want something fun to do with the kids for Fourth of July. Come and make your own flag! Bring the family together, have fun and show off your artistry with this fun and educational kit that serves as a great teaching tool about American history. This is a free two-day event for the whole family. We'll be turning the classroom into a paint room and anyone who wants to, can come make their own flag!

Shop Safety

Saturday, July 12, 10 AM - 1 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required. CLS 226

Shop Safety

Saturday, July 12, 2 PM - 5 PM

Woodcraft's Shop Safety class is an introduction to safe shop practices. As this class is a prerequisite to other classes offered by Woodcraft, the instructor will discuss general safety concerns as they relate to the equipment located in our shop. It also presents the student an opportunity to become familiar with Woodcraft's particular machinery. While your own equipment will most likely be different than ours, the safety practices learned will be easily applied in your shop. Hands on experience will be gained on some of the most commonly used equipment in the shop. In this new and expanded version of the class, we will also be discussing the different types of safety equipment available for shop use, from safety glasses to first aid kits. Hearing and eye protection and closed toe shoes are required. CLS 226

Router 101

Sunday, July 13, 12 PM - 4 PM

Join us for the first in a series of skills building router classes sure to put you on the right track with your new router. This hands-on course will cover the basic functions of one of the workshop's most versatile tools. The router can be used for everything from putting a decorative edge on wood, to making fast and accurate mortise and tenon joints. Topics include router safety, choosing a router, making jigs, bit selection, router tables and more. Students will get practical experience using the fixed base router and router table, while completing a small project. This course provides the foundation for more advanced techniques and classes. CLS729

Introduction to the Wood Lathe

Saturday, July 19, 10 AM - 4 PM

This class is for the brand new woodturner and those for whom any association with the lathe may have been many years ago. It is also for those who have recently acquired a lathe or those who are anticipating purchasing one. We will introduce you to the basics of woodturning, the medium we use (wood), some of the things you can do on the lathe, which lathe might be best for you, and how to use it safely. You will be told about all of those other things you will need but nobody told you about - tools, grinders, chucks, drills, sandpaper, finishes, etc. Some of these (turning tools for instance) are a necessity, while others are desirable options. We will cover some basic sharpening techniques using a roughing gouge for our demonstration. Time permitting and how well you grasp a few basic tool techniques, you will be guided through making a simple project that you can take home and use. (All materials are included)

From Rough to Ready; Lumber Preparation

Sunday, July 20, 12 PM - 4 PM

If you haven't realized it yet, you soon will. Your projects will only be as square and true as the lumber you start with. This hands on class will show you the techniques you need to turn that rough cut lumber into beautiful ready to use lumber. CLS230

Basic Cabinet Making

Part 1: Saturday, July 26, 10 AM - 5 PM

Part 2: Sunday, July 27, 11 AM - 4 PM

Learn to make basic cabinets for the kitchen, bathroom or shop in this two-day class. Bob will discuss all aspects of cabinet making such as design, layout, and building the carcass. Bob will teach you how to use the pocket hole jig for joining face frames, and for joining the carcasses of the cabinets. You will make a shelf and then use a jig for drilling shelf pin holes. The router table, table saw, jointer, sander, and planer will all be used. During the class, you will make and then take home a 2' x 2' cabinet.